qerttennessee.blogg.se - Apple airport extreme setup

#APPLE AIRPORT EXTREME SETUP FOR FREE#
#APPLE AIRPORT EXTREME SETUP FOR MAC#
#APPLE AIRPORT EXTREME SETUP MANUAL#
#APPLE AIRPORT EXTREME SETUP PASSWORD#
#APPLE AIRPORT EXTREME SETUP DOWNLOAD#

#APPLE AIRPORT EXTREME SETUP PASSWORD#

That way it will be consistent around the school and roving mobile devices will not have to re-enter the password when they move to another room. If you are setting up multiple airports (and especially if you are setting them up for roving iPod Carts or other devices that move room to room) you will want to give all of them the same network name (make sure everything is entered identically). In this example, it is given the name Rover Wireless. This is the name that will show on wireless devices looking for a wireless network to connect to. This is where you will create a Wireless Network Name. When you have done that, the screen will look like the one below. If you are setting up several airports, it would be easiest to use the same password for each one. You will need this password to access the airport using the utility and to make any changes to its settings in the future. Next, you will create and verify a password for the AirPort Extreme. On this screen you will give the Airport a name (This is different than the name of the wireless network, which you will name in an upcoming step.) If you are setting up more than one Apple Airport, you may want to name them the same name followed by different consecutive numbers and then keep track of where you place each airport in the school. From that screen choose Base Station.Īfter choosing Base Station, the screen will look like the one above. The next screen will look like the one above. The older airports (dome shaped airports) do not give that prompt. or the second choice…Use default settings and save previous settings as a profile. If you are setting up one of the newer airports (square type) then you may get a popup that asks if you want to restore.

#APPLE AIRPORT EXTREME SETUP MANUAL#

If you have just done a reset, the base station name will be a combination of letters and numbers.Ĭhoose the Manual Setup button at the bottom of the screen. The airport will show in the left column with a name. Click on rescan if it doesn’t, but then wait a few seconds for it to show back up. The airport will disappear from the Utility and after a few seconds will show up again. If you are doing a reset of an airport that has been set up previously, use a ballpoint pen, paperclip or similar object to hold in the small reset button that is left of the WAN port on the backside of the airport (may be in a different location depending on model). With the Utility open, your airport should now show up in the left column. Also plug in the power cord on the airport. Plug the cable into the circular WAN port on the airport. Plug an Ethernet cable into your Mac computer and the other end into the Apple Airport. Open the Airport Utility to begin managing your airport(s).

#APPLE AIRPORT EXTREME SETUP DOWNLOAD#

Do a Google search for the 5.5.2 version of the AirPort Utility and then download it.

Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3Īny Wi‑Fi-enabled device that uses the 802.Download the AirPort Utility onto your Mac.

iPhone, iPad, or iPod touch with iOS 6 or later and AirPort Utility 1.3.

Maximum storage altitude: 4500 m (15,000 feet).

Operating altitude: tested up to 3000 m (10,000 feet).

Relative humidity (operating): 20% to 80%, noncondensing.

Operating temperature: 0° to 35° C (32° to 95° F).

Three Gigabit Ethernet LAN ports for connecting a computer, Ethernet hub, or networked printer.

USB 2 port for connecting a USB printer or hard drive 3.

Gigabit Ethernet WAN port for connecting a DSL modem, cable modem, or Ethernet network.

Simultaneous dual-band 802.11ac wireless.

#APPLE AIRPORT EXTREME SETUP FOR FREE#

Bonjour for Windows available for free download.

AirPort Utility for iOS available for free download.

#APPLE AIRPORT EXTREME SETUP FOR MAC#

AirPort Utility for Mac available for free download.

NAT, DHCP, PPPoE, VPN Passthrough (IPSec, PPTP, and L2TP), DNS Proxy, IPv6 (6to4 and manual tunnels).

Interoperable with 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ac-enabled Mac computers, iOS devices, Apple TV, Windows-based PCs, and other Wi-Fi devices.

Channels 1-13, 36-64, and 149-165 approved for use in Australia, Hong Kong, and New Zealand.

Channels 1-13, 36-64, and 100-140 approved for use in Europe and Japan.

Channels 1-11, 36-116, 132-140, and 149-165 approved for use in the United States and Canada.

Radio output power: 32.5 dBm maximum (varies by country).